Certified Reference Materials,Standard Reference Material,Consumables Supplier

Inlaid Mosaic Powder Material Bakelite Powder

Metallographic hot mosaics are suitable for different types of mosaics to do sample mosaics, in order to test the hardness of small workpieces and observe the metallographic structure. The Mosaic powder can be prepared by the Mosaic machine sample preparation for 8-15 minutes, the heat preservation is 140-180℃, the Mosaic pressure is 30±3MPa, and the sample preparation can be completed.

Tags :

Cold Powder Metallurgical Damascene Inlay Mosaic

The product is refined from imported raw materials. During the production process of printed circuit boards, in order to monitor the thickness of the coating in the PTH hole, the line etching side etching rate, etc., metallographic section microanalysis must be performed. It is a special chemical product for metallographic slice molding using acrylic resin as the main raw material. It has excellent properties such as smooth and fast curing at room temperature, few bubbles, no discoloration after long-term storage, high hardness, and acid and alkali resistance.

Tags :

metallographic sample

Metallographic Cold Mounting Resin

Like various cold embedding resins, crystal glue can be easily peeled off after curing. The experimental operation is simple. You only need to pour the sample and cured resin or crystal glue into the model. It is economical and applicable, and the mold body is moderate, saving the cost of cold mounting materials. Reuse saves the cost of slicing molds.

Tags :

Metallographic Cold Mounting

Cutting Coolant Fluid for Metallographic Sectioning

Metallographic Cutting Coolant has extremely strong cooling, lubrication and anti-rust properties. When cutting, lower the temperature of the sample to reduce the thermal impact of the sample. It has a cleaning and anti-rust effect on the sample. Increasing the lubrication performance and improving the surface finish of the sample can also increase the life of the cutting blade and prevent the cutting machine from being corroded.

Tags :

CRMS and Consumbles