Because polishing is such a critical step in sample preparation, it’s important to choose a high quality polishing cloth. Our metallographic polishing cloth pads are thoroughly testedto provide a complete solution that delivers reliable results for each sample processed.

Abrasive Paper is made of imported latex paper base and strictly graded silicon carbide abrasive processed by electrostatic sand planting process. The product has the characteristics of good water resistance, strong grinding and excellent wear resistance. Pressure sensitive adhesive sandpaper with advanced transparent double-sided tape, no residue, more convenient to use.

Cutting is the first step in a complete material analysis,the selection of cutting machine and blades must match geometry and material properties of sample.

Water-soluble metallographic grinding paste is a polishing and grinding product that is finely formulated with diamond powder, grinding aids and dispersant materials. It also eliminates the difficulty in cleaning after polishing caused by oily abrasive paste in the past, and the unclear surface of the sample. Water-soluble diamond abrasive paste can quickly achieve the ideal finish after polishing, greatly improving experimental efficiency.

Diamond suspension polishing fluid is suitable for automatic grinding and polishing machines. It has good suspension performance and the abrasives are suspended in the liquid for a long time. And polishing lubrication coolant is added to the liquid. The sample can quickly reach the desired finish after polishing.

It is developed using high-quality diamond powder, media and additives, integrating physical and chemical effects,the particle size distribution is uniform, and the particle shape is spherical and octahedral, so the grinding product is better and less likely to produce scratches,the hardness is extremely high, The cutting edge is sharp and sharp, and has good grinding effect on hard and soft materials. It only produces grinding effect without rolling and does not produce disturbing layers; it is mainly used for mechanical grinding and polishing of hard alloys, alloy steels, high carbon steels and other high-hardness materials. Precision grinding of material parts and metallographic and petrographic samples, etc.

Metallographic hot mosaics are suitable for different types of mosaics to do sample mosaics, in order to test the hardness of small workpieces and observe the metallographic structure. The Mosaic powder can be prepared by the Mosaic machine sample preparation for 8-15 minutes, the heat preservation is 140-180℃, the Mosaic pressure is 30±3MPa, and the sample preparation can be completed.

The product is refined from imported raw materials. During the production process of printed circuit boards, in order to monitor the thickness of the coating in the PTH hole, the line etching side etching rate, etc., metallographic section microanalysis must be performed. It is a special chemical product for metallographic slice molding using acrylic resin as the main raw material. It has excellent properties such as smooth and fast curing at room temperature, few bubbles, no discoloration after long-term storage, high hardness, and acid and alkali resistance.

Like various cold embedding resins, crystal glue can be easily peeled off after curing. The experimental operation is simple. You only need to pour the sample and cured resin or crystal glue into the model. It is economical and applicable, and the mold body is moderate, saving the cost of cold mounting materials. Reuse saves the cost of slicing molds.

Metallographic Cutting Coolant has extremely strong cooling, lubrication and anti-rust properties. When cutting, lower the temperature of the sample to reduce the thermal impact of the sample. It has a cleaning and anti-rust effect on the sample. Increasing the lubrication performance and improving the surface finish of the sample can also increase the life of the cutting blade and prevent the cutting machine from being corroded.